Figure 8 Disassembly 1 (bearing lid)
CS/
5284/
A
1.
Put the pump upside down on the foam plastic pad.
2.
Use the 22 mm hex socket wrench to unfasten the bearing lid.
3.
Open the pump by removing the bearing lid.
4.
Use the 22 mm hex socket wrench to unfasten the axial limiter and remove it.
Figure 9 Disassembly 2 (axial limiter) as figure 6
CS
/52
85/
A
06/2021 - ©Edwards Limited
Page 15
300872820_002_C2
B8J203880_C
300872820_002_C2 - Disassembly
Summary of Contents for nEXT 1230H
Page 32: ...edwardsvacuum com...
