Chapter 3: FireWorks node connections
40
P/N 3102213-
EN • REV 006 • ISS 18FEB19
To enable test signing:
1.
Click Start > Run.
2. In the Open box, type:
bcdedit.exe -set TESTSIGNING ON
, and then click OK.
3.
Restart the computer.
To install the com0com driver:
1. Open the C:\FireWorks\Tools\
Serial Port Tool folder.
2. Open the com0com-2.2.2.0-x64-fre-
signed.zip
file, and th
en click Unzip.
3. Open the com0com-2.2.2.0-x64-fre-signed folder, double-click setup.exe, and then follow the on-screen
instructions.
4.
On the Start menu, open the com0com folder, and then double
-
click Setup.
5
.
In the Setup for com0com dialog box, rename the virtual COM port pair to two
unused
Windows COM port
numbers.
For example, rename the virtual COM ports to COM10 and COM11 as shown below.
6. Click Apply, and then click Close.
Summary of Contents for FireWorks FW-UL6S
