© Edwards Limited 2018. All rights reserved.
Page 59
Edwards and the Edwards logo are trademarks of Edwards Limited.
Service, spares and accessories
B722-40-880 Issue H
7
Service, spares and accessories
7.1
Introduction
Edwards products, spares and accessories are available from Edwards companies in Belgium, Brazil, China, France,
Germany, Israel, Italy, Japan, Korea, Singapore, United Kingdom, USA, and a world-wide network of distributors.
Order spare parts and accessories from the nearest Edwards company or distributor. When ordering, please state for
each part required:
Model and Item Number of the equipment
Serial number (if any)
Item Number and description of the part
7.2
Service
Edwards products are supported by a worldwide network of Edwards Service Centres. Each Service Centre offers a
wide range of options including: equipment decontamination; service exchange; repair; rebuild and testing to factory
specifications. Equipment that has been serviced, repaired or rebuilt is returned with a full warranty.
Edwards local Service Centres can also provide Edwards engineers to support on-site maintenance, service or repair
of the equipment.
For more information about service options, contact the nearest Service Centre or other Edwards company.
7.2.1
Returning a pump for service
If returning a pump to a Service Centre, use the returns procedure included at the end of this manual. The instruction
in the returns procedure to drain all fluids does not apply to the lubricant in the pump oil reservoirs. Do not return
the pump with the accessories fitted. Remove all accessories and retain them for future use.
Ensure that a completed HS2 form is returned with the pump.
If the pump is configured to suit the application, make a record of the configuration before returning the pump. All
replacement pumps will be supplied with default factory settings. The TIC/DX PC Monitor program (available as an
accessory) allows for automatically downloading and saving the configuration.
7.3
Spares
7.3.1
ISX inlet screen
An inlet screen is fitted to the pump as supplied to prevent damage from the entry of debris into the pump. The Item
Numbers of replacement inlet screens are given below. Select the inlet screen according to the pump inlet flange
size. The inlet screen cannot be replaced with an NW inlet flange.
Flange Size
Inlet Screen
Item Number
DN63ISO-K/
DN63CF
ISX 75D/63
B722-40-860
DN100ISO-K/
DN100CF
ISX100
B580-51-001
