© Edwards Limited 2016. All rights reserved.
Page 27
Edwards and the Edwards logo are trademarks of Edwards Limited.
Operation
D397-53-880 Issue C
4.7.55
Module 271 - CXS Exhaust Temperature Warning
Input Bytes:
Byte 1 is status. Values: 1 = No warning, 0 = Warning
Byte 2 is condition byte (see
).
4.7.56
Module 272 - CXS Exhaust Temperature Alarm
Input Bytes:
Byte 1 is status. Values: 1 = No Alarm, 0 = Alarm
Byte 2 is condition byte (see
).
4.7.57
Module 273 - CXS Exhaust Pressure Warning
Input Bytes:
Byte 1 is status. Values: 1 = No warning, 0 = Warning
Byte 2 is condition byte (see
).
4.7.58
Module 274 - CXS Exhaust Pressure Alarm
Input Bytes:
Byte 1 is status. Values: 1 = No Alarm, 0 = Alarm
Byte 2 is condition byte (see
).
4.7.59
Module 275 - CXS Body Thermal Snap Switch
Input Bytes:
Byte 1 is status. Values: 1 = Good, 0 = Bad (Hot)
Byte 2 is condition byte (see
).
4.7.60
Module 276 - CXS Motor Thermal Snap Switch
Input Bytes:
Byte 1 is status. Values: 1 = Good, 0 = Bad (Hot)
Byte 2 is condition byte (see
).
4.7.61
Module 277 - CXS Flame Arrestor
Input Bytes:
Byte 1 is status. Values: 1 = Good, 0 = Bad.
Byte 2 is condition byte (see
).
4.7.62
Module 279 - CXS MB Motor Run
CXS MB is always EH type (non-inverter).
Input Bytes:
Byte 1 is status. Values: 1 = Good, 0 = Not running.
Byte 2 is condition byte (see
).
4.7.63
4.7.60 Module 280 - CXS MB Motor Thermistor
CXS MB is always EH type (non-inverter).
Input Bytes:
Byte 1 is status. Values: 1 = Good, 0 = Bad.
Byte 2 is condition byte (see
).
4.7.64
Module 281 - CXS MB Water Flow
CXS MB is always EH type (non-inverter).
Input Bytes:
Byte 1 is status. Values: 1 = Good flow 0 = Bad flow.
Byte 2 is condition byte (see
).
