Edwards AIM-SI1-NW25, Instruction Manual, Page: 21 / 26

© Edwards Limited 2015. All rights reserved. Page 17
Edwards and the Edwards logo are trademarks of Edwards Limited.
Storage and disposal
D146-71-880 Issue E
6 Storage and disposal
6.1 Storage
Return the AIM Gauge to its protective packaging and store the AIM Gauge in clean dry conditions until required for
use. Do not exceed the storage temperature conditions specified in
Section 2 .
When required for use, prepare and install the AIM Gauge as described in Section 3 .
6.2 Disposal
Dispose of the AIM Gauge and any components safely in accordance with all local and national safety and
environmental requirements.
Alternatively, you may be able to recycle the AIM Gauge and/or cables; Contact Edwards or your supplier for advice
(also see below).
The AIM Gauge and associated cables are within the scope of the European Directive on Waste Electrical and
Electronic Equipment. Edwards offers European customers a recycling service for the AIM Gauge/cables at the end
of the product’s life. Contact Edwards for advice on how to return the AIM Gauge/cables for recycling.
Particular care must be taken if the AIM Gauge has been contaminated with dangerous process substances or if the
AIM Gauge has been overheated or has been in a fire.