EDT Eurodima Braxx WB12T, User Manual

Page: 9 / 24

WB12T
9
6.6 Workplace
The user’s workplace is at the control panel, which is to be placed laterally to the wire saw
unit and out of the danger area (
Pict. 3 , see page 16).
Caution – never stay in the alignment of the wire level!
6.7 Approved Operators
The system may only be used, maintained and repaired by personnel who know the system
and are aware of the potential dangers. This user manual has to be absolutely adhered to
and should always be available (with a duplicate in the control unit). The operating company
has to provide the manual to the user and make sure that he has read and understood it.
Only then, the user may opeate the system.
Youths under the age of 16 must not operate the wire saw system!
The responsibilities for the different tasks at the unit must be clear and complied with. No
unclarities may occur as they endanger the user’s safety.
The user has to ensure that only authorized personnel operate the machine. He is
responsible towards third parties in the working area of the unit.
6.8 Personal safety measures
Use safety goggles for protection against metal, concrete and masonry chips in the air.
Wear protection gloves against sharp-edged wires and on cut pieces.
Wear tight clothes, no jewellery and put your hair back or cover it.
According to the type of cutting, further protection is recommended:
o
dust mask
o
ear protection
o
leather apron
o
face protection
o
safety shoes
6.9 Safety measures at the installation place
The unit must stand securely on a firm level surface. For cuts with more than 4 m wire-
concrete contact surface or at flat surface, the machine can be fixed with a tube bar.
Secure by according internal instructions and checks that the workplace and its surroundings
always are clean and clear.
Use hard hat
Use breathing
protection
Use safety
goggles
Use ear
protection
Use safety shoes
Use protective
clothing
Use protection
gloves