EDNord QMS 4060, Manual

Page: 30 / 340

Media
QMS 4060 Print System Operation 2-6
Media
Preventing Media Jams
There are several things you can do to reduce the occurrence of
media jams.
n
Use paper, labels, and transparencies that match the printer
specifications. See appendix B, “Technical Specifications,” in the
Reference guide.
n
If you have problems with double feeding, remove the paper from
the tray or input bin and fan the edges. The sheets may be stick-
ing together.
» Note: Do not fan transparencies since this causes static.
n
Print paper must be stored away from moisture and humidity.
Recommended storage temperature and humidity are 32°-95°F/
0°-35°C and 20%-80% RH for paper sealed in cartons. The rec-
ommended storage temperature and humidity for paper in
opened cartons are 59°-77°F/15°-25°C and 40%-50% RH.
n
Refer to the table in the next section for loading paper
requirements.
n
If none of the above relieves paper jamming, notify your vendor.
Loading Paper Requirements
When loading paper, you should note the direction of the arrow on the
manufacturer’s end-label. This arrow identifies the face side of the
paper.
Inspect the paper for indented or interlocked edges, bent corners,
wrinkled sheets and excess glue from the wrapper. Always discard
the top and bottom sheets in case glue from the wrapper has leaked
upon them.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500