Configuring the
Interface
QMS 1060E Print System Getting Started
4-10
»
Note:
You can’t install the utilities by copying files from the disks.
You must run the installation program.
3
In the Run dialog box, type
x
:setup
↵
where
x
is the name of the drive in which you inserted the Utilities
disk (for example,
a:setup
↵
) and choose OK.
4
When prompted, specify the directory in which to install the
utilities.
5
Follow the instructions on the screen.
6
When the installation is complete, remove the disk from the
disk drive and store it in a safe place.
7
Continue with the next section, “Configuring the Interface.”
Configuring the Interface
This section describes the quick configuration procedure for the
printer interface. For a complete discussion of all of the configuration
options available through the Administration/Communications/Net-
work 2/CrownNet menu, see chapter 2, “Configuring the Interface,” of
the
QMS CrownNet Interface System Administrator’s Guide
.
You can make these configuration changes through any of the follow-
ing means:
n
Printer Control Panel—For information on using the printer con-
trol panel to change configuration menu settings, refer to chapter
4, “Printer Configuration,” of the
Reference
guide.
n
CrownAdmin (for DOS, Macintosh System, or Windows) or
CrownNet Manager for OS/2—For more information on using
this software, refer to the appropriate chapter in the system
administrator’s guide.
»
Note:
CrownAdmin/CrownNet software is not available for the
UNIX environment.
EDNord - Istedgade 37A - 9000 Aalborg - telfon 96333500
Summary of Contents for QMS 1060E
