3-25
Making Basic Checks
Communications Testing
Before performing communications testing, all peripheral equipment
should be set up and timed. Refer to the Peripheral Equipment Setup and
Timing Manual, P/N TP0377-01, for those procedures.
Figure 3-14. Edit Screen Example
To do the communications testing, refer to the Edit Screen illustration,
Figure 3-14, and perform the following steps:
1. Load tapes with time code into your machines.
2. Activate the EDIT ENABLE buttons on the video switcher and the
audio mixer.
3. Press
[SHIFT
] and the dark grey
[RESET]
key.
4. Alternately press the dark green R-VTR, A-VTR, and B-VTR keys.
The Mark Table cursor (**) moves from source to source, and video
switcher and audio mixer crosspoints switch to the assigned
crosspoints as you press the different keys.
5. Select the A-VTR and press the light blue
[FF]
key. The A-VTR fast
forwards.
TITLE
SUPER EDIT V7.1 "system" Snnnnn EDIT SUITE #1
TP0353-54
A12V
CUT TO
A-VTR
SOURCE
R-VTR
>A-001
B-002
AUX
BLK
(MESSAGE AREA)
IN
01:00:25:00
01:02:45:00
02:15:35:03
OUT
01:00:30:00
DUR
00:05:00
SPD
–>
POS
N 01:00:28:03
N 01:02:48:01
N 02:15:35:00
T=00:00:25:00
EVENT 0006
(EDIT TIMER)