3-22
Section 3
— Installing The Editor
7. Enter the desired video crosspoint and press
[ENTER]
. The video
crosspoint you entered appears on the line with the selected device and
the system prompts:
AUD XPNT = ?
Before making audio crosspoint assignments, note the following items:
■
Non-audio sources are assigned to crosspoint 0.
■
For E-E previewing, the R-VTR cannot be changed from crosspoint
zero.
8. Enter the desired audio crosspoint and press
[ENTER]
. The audio
crosspoint you entered appears on the line with the selected device.
9. If you have the Preview Preselector option, the system prompts:
PRSEL XPNT = ?
10. Enter the desired Preview Preselector crosspoint and press
[ENTER]
.
Your entry appears on the display.
11. Super Edit provides PAL users the opportunity to assign a color frame
offset. Enter the desired color frame offset value (from 0 to 3) and press
[ENTER]
.
The frame offset you entered appears on the display.
12. Repeat Steps 1 through 11 for all connected VTRs.
AUX and BLK Crosspoint Assignments
Default video and audio crosspoints are 007 for AUX and 000 for BLK. To
change the AUX and BLK assignments, perform the following steps:
1. Use
[
↑
]
and
[
↓
]
to highlight AUX or BLK. The system prompt indicates:
VID XPNT = ?
2. Enter the desired video crosspoint and press
[ENTER]
. The crosspoint
you entered appears on the selected AUX or BLK line and the system
prompts:
AUD XPNT = ?
3. Enter the desired audio crosspoint and press
[ENTER]
. The crosspoint
you entered appears on the selected AUX or BLK line.