3-3
Editor Installation
Installing The Computing Chassis
In installing the Computing Chassis, the first thing to determine is whether
it is to be mounted in an equipment rack or placed on a console or table top.
Console or Table Top Installation
If the Chassis is to be placed on a console or table top, you may want to
protect that surface by installing the four rubber feet provided as
illustrated in Figure 3-1. To install the rubber feet, refer to Figure 3-1 and
perform the following procedure:
1. Locate the bag containing four grey mounting feet and remove
them from the bag.
2. Carefully turn the Computing Chassis over and place it on a flat
level work area on its top side.
3. One at a time, remove the backing from each foot and firmly press
into place approximately 1" in from each side at the corners on the
bottom plate. (See Figure 3-1.)
4. Carefully turn the Computing Chassis back over until it is resting
on the mounting feet.
Figure 3-1. Table Top Mounting Foot Installation
1"
1"
Desk-top Mounting Foot
Computing Chassis Side
0354-00-006
