EditShare 24Q, Setup And User Manual

Page: 55 / 112

TP-00347-01
55
Overview
Changes that can be made are:
• Host Name: In this box enter the name you wish to use to address this library in the future. It
is recommended that you use a name that is relevant to its location and/or its purpose. The
Host Name may be up to 15 characters long.
Allowed characters are: [A-Z], [a-z], [0-9], hyphen [-] and period [.]
Disallowed characters are: hyphen [-] as the first character, blanks or consecutive hyphens
[-]
• Domain Name: In this box is the domain in which the library is registered. It may be updated
by editing the name and submitting the changes. The Domain Name may be up to 39 chars
long.
Allowed characters are: [A-Z], [a-z], [0-9], hyphen [-] and period [.]
Disallowed characters are: hyphen [-] as the first character, blanks or consecutive hyphens
[-], blanks or consecutive hyphens [-] as the first or last
character of a label (A period [.] is the delimiter of domain
name labels!)
The sum of characters of the Host Name and the Domain Name may not exceed 54
(15+39) characters.
• IPv4:
• DHCP Address Enabled - Used to set the RMU to seek an assigned IP address from the
network's DHCP server.
• Static Address - This field is only active with DHCP address off (unchecked), a static IP
address may be programmed in this field.
• Subnet Mask - Used to set the Network Mask, contact your Network administrator to
receive this setting address if required.
• Gateway address - Used to set the Gateway Address; contact your Network administrator
to receive this address if required (used when an IP address does not match any other
routes in the routing table)
• IPv4 DNS Server 1 - This is the IP address of your name server (DNS server). A DNS server
allows the library to communicate with other network clients via their host name. If you
have a DNS Server on your network, enter the IP address in this field.
• IPv4 DNS Server 2 - This is the alternate IP address of your name server (DNS server). A DNS
server allows the library to communicate with other network clients via their host name.
If you have a DNS server on your network, enter the alternate IP address in this field.
• IPv6:
• IPv6 DNS Server 1 - This is the IP address of your name server (DNS server). A DNS server
allows the library to communicate with other network clients via their host name. If you
have a DNS Server on your network, enter the IP address in this field.
• IPv6 DNS Server - This is the alternate IP address of your name server (DNS server). A DNS
server allows the library to communicate with other network clients via their host name.
If you have a DNS server on your network, enter the alternate IP address in this field.
• Stateless Auto Configuration
• DHCPv6 Addressing - Used to enable DHCP addressing assignment from the network
name server
• Static Addressing - Used to enable a static IP address for the RMU access
• Static Address - Setting of the static IP address for the RMU
• Enable SSL for Web