manualshive.com logo in svg

Edirol V-4, Owner'S Manual

Share
Download
Edirol V-4 Owner'S Manual Download Page 69

 

69

Using the V-4 in Presentation mode

 

Switching to Presentation mode

 

To switch from Normal mode to Presentation mode, turn off the power of the V-4. Then hold down 
channel A input select buttons 1 and 4, and press the power button.

 

■

 

The function of the input selector

 

Presentation mode assumes that you will be combining two screens. Use the channel A input 
selector to switch the background image. When you switch the background image in Presentation 
mode, the currently selected transition effect will automatically be applied.
Use the channel B input selector to switch the image of the secondary screen, the screen overlays 
on background.

 

■

 

The function of the BPM/CONTROL dial

 

Use the BPM/CONTROL dial to set the duration of the transition effect. If this dial is set to the far 
left, the transition effect will have a duration of 0 seconds. If set to the far right, the transition effect 
will have a duration of 4 seconds.

 

Presentations using two screens with Picture In Picture

 

Here’s how you can composite two screens, a technique frequently used in presentations.

 

1.

 

Switch the V-4 to Presentation mode.

Start up the V-4 in Presentation mode as described above.

If you want to start up in Normal mode and then switch to Presentation mode by making a menu 
setting, choose the “Utility” menu item “V-4 Mode” and then select “Presentation.”

Once you switch to Presentation mode, that setting will be preserved. The next time you start up 
the V-4, you can simply press the power button and the V-4 will start up in Presentation mode. If 
you want to start up in Normal mode, hold down the channel A input select buttons 1 and 4 while 
you press the power button.

V-4_e.book 69 ページ ２００７年１０月１７日　水曜日　午後７時１５分

Summary of Contents for V-4

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands