Edirol UR-80, Owner'S Manual, Page: 82 / 396

82
UR-80 Editor
Saving or loading in SMF format
A memory set you edit in UR-80 Editor can be saved/loaded as a SMF format file.
■
Saving a memory set in SMF format
Here’s how to save the memory set currently being edited, in SMF format. The contents of the
Comment field in the Message Assign window will also be saved in the SMF file.
1.
From the File menu, choose Save As.
If you want to save by overwriting the most recently opened file, choose Save .
2.
Specify a file name, and click Save.
■
Loading a memory set from a SMF file
Here’s how to load a memory set that was saved in SMF format.
* UR-80 Editor can also load memory sets for the Edirol PCR series that were saved in SMF format. For details,
refer to the online help for UR-80 Editor.
* The contents of the Comment field in the Message Assign window can be loaded only from an SMF file that
was saved by UR-80 Editor.
1.
From the File menu, choose Open.
2.
Specify the file that you want to load, and click Open.
System settings
Here’s how to edit the system settings of the UR-80 itself.
fig.system-setting.e
1.
From the System menu, choose System Settings.
UR-80 Editor will load the system settings from the
UR-80.
If loading is not successful, check the connections and
try again from step 1.
2.
The UR-80 System Settings dialog box will appear.
3.
To apply the settings, click[Apply].
Default Tempo
Specifies the default tempo for transmitting MIDI Timing Clock messages.
When you turn on the power, Timing Clock tempo will be initialized to the
setting you specify here.
MIDI Clock Specify the output port for MIDI Timing Clock messages.
HQ/GM2 messages Specifies the output port for messages in Synth Edit mode.
V-LINK messages Specifies the output port for messages in V-LINK mode.