Edirol UA-101, Owner'S Manual, Page: 15 / 64

15
Front and rear panel
fig.rear.eps_60
22.
Input level select switches
These select the input gain of
input jacks 3–8 (26)
.
23.
MIDI IN/OUT connectors
You can connect the MIDI connectors of your MIDI devices here to transmit and
receive MIDI messages.
24.
USB connector
Use a USB cable to connect this to your computer.
You must use the included USB cable.
25.
Output jacks 1–8 (nominal output level: +4 dBu)
These jacks output analog audio signals. They support balanced output.
26.
Input jacks 3–8
Use these jacks to input audio signals from your mixer, audio device, or MIDI tone
generator. They support balanced input.
27.
Monitor output jacks
The sound received via the various input jacks and the sound output by the various
audio ports of your computer are mixed and output from these monitor output
jacks.
You can use UA-101 Control Panel to adjust the input level for each input jack and
the output level of each audio port.
For details, refer to
“UA-101 Control Panel” (p. 38).
Nominal input level Maximum input level
+4dBu +16dBu
-10dBu +9dBu
25
26
18 19 20 21 24 22
23 27
UA-101_e.book 15 ページ ２００７年８月６日 月曜日 午後１時２３分