94
Playing movies in the Play Mode
The Play Mode is where you play back the movies you created in the MOVIE
EDITOR screen at full screen.
You can select the Play Mode for movie playback on the front panel.
About the Play Mode
The Play Mode has the following categories:
• Movie Play mode
You can select to play a certain movie by using the buttons on the front panel.
• Schedule Play mode (Weekly Play)
You can set a weekly schedule to play back a series of movies.
• Schedule Play mode (Daily Play)
You can set a daily schedule to play back a series of movies.
At the factory defaults, the unit automatically goes into Play Mode right after the
power is switched on.
This section explains how to select the Play Mode when the unit is not in Play Mode.
fig.front05.eps
1
Access the MAIN MENU screen.
You can choose from the following to go to the MAIN MENU screen.
• Press and hold the MENU button for more than 2 seconds.
• Click [MAIN MENU] in the MOVIE EDITOR screen or SCHEDULER screen.
2
Click [SELECT] in the “PROJECT” area.
The SELECT PROJECT window appears.
3
Select a project.
Click to choose a desired project, then click [OK].
The selected project is loaded and the project name is shown in the “PROJECT” area.
4
Click [PLAY MODE].
The unit starts movie playback as has been set by the Scheduler function (p. 81).
It takes some time to load data.
Activating the Play Mode
You can set the playback mode
when the Play Mode is
activated (or right after the
unit is powered on). This
setting is performed in the
SCHEDULER screen (p. 81).
For detailed instructions
regarding the Scheduler
function, refer to
Normally, the unit
automatically enters Play
Mode when powered on.
However, you can also set it so
the unit enters a different
mode after power-up (p. 100).
MENU button
For more information about
the MAIN MENU screen, refer
to
For more information about
the project, refer to
000RG-100.book 94 ページ ２００４年８月６日 金曜日 午後５時３７分
