Edirol RG-100 Owner'S Manual Download Page 75

Page: 75 / 128

Creating a movie

Select the desired palette.

fig.select palette01.eps

A list of the palettes inside the project is shown, and you can select the desired
palette.

When you click a palette, the names of the palette and the movies inside the palette
are shown in the right side of the list, so you can select the palette while checking its
information.

Click [OK].

The selected palette starts loading.

It takes some time to load the palette.

When loading is completed, the MOVIE EDITOR screen of the selected palette
appears.

To cancel this operation, click [CANCEL], and the SELECT PALETTE window
disappears.

You can save a palette at any time during operation.

You can also save the palette as a different one (which is also saved in the same
project). You can change the names of palettes (p. 79).

fig.editor24.eps

Saving a palette

[OK]

[CANCEL]

Select a palette.

Palette information

[SAVE]

[SAVE AS...]

000RG-100.book 75 ページ２００４年８月６日　金曜日　午後５時３７分

Summary of Contents for RG-100

































































































































Search results

Summary of Contents for RG-100

Reviews:

Related manuals for RG-100

Brands by name

Popular brands

Edirol RG-100, Owner'S Manual

Search results

Summary of Contents for RG-100

Reviews:

Related manuals for RG-100

Brands by name

Popular brands