Edirol RG-100 Owner'S Manual Download Page 74

Page: 74 / 128

Creating a movie

You can copy a palette to store to other projects, or import a palette from another
project.

Select a palette from the project.

fig.editor23.eps

Click [CHANGE...].

A confirmation dialogue appears, asking if the current palette is to be saved.

If the palette has not been edited, this window does not appear, and the SELECT
PALETTE window appears instead. In this case, skip to Step 3.

Click the desired response.

fig.savedata.eps

• [Save]

Save the current state of the palette, and access the SELECT PALETTE window.

• [Cancel]

Returns to the former screen.

• [Don’t Save]

Do not save the current state of the palette, and access the SELECT PALETTE
window.

Editing the palettes

Selecting a palette

[CHANGE...]

000RG-100.book 74 ページ２００４年８月６日　金曜日　午後５時３７分

Summary of Contents for RG-100

































































































































Search results

Summary of Contents for RG-100

Reviews:

Related manuals for RG-100

Brands by name

Popular brands

Edirol RG-100, Owner'S Manual

Search results

Summary of Contents for RG-100

Reviews:

Related manuals for RG-100

Brands by name

Popular brands