Edirol RG-100 Owner'S Manual Download Page 51

Page: 51 / 128

Creating a movie

Set the total length of the movie.

The total time of the entire movie is displayed at the top of the timeline.

fig.editor10.eps

fig.movie length.eps

Click

The MOVIE LENGTH setting window appears.

fig.movie length01.eps

Set the entire length of the movie.

Click “MIN” to select the minutes parameter.

Click “SEC” to select the seconds parameter.

Click [OK].

The length of the movie is set, and the window disappears.

The movie length is shown on the timeline.

To cancel this operation, click [CANCEL]; the selection window goes away.

The movie length is shown on the MOVIE LENGTH window.

Setting the total movie length

MOVIE LENGTH

Minutes

Seconds

[OK]

[CANCEL]

You can change the length any
time while creating the movie.

You can also set the movie
length to the desired time
without changing the structure
by selecting the “Relate data
position to MOVIE length”
checkbox in the MOVIE
LENGTH window.

000RG-100.book 51 ページ２００４年８月６日　金曜日　午後５時３７分

Summary of Contents for RG-100

































































































































Search results

Summary of Contents for RG-100

Reviews:

Related manuals for RG-100

Brands by name

Popular brands

Edirol RG-100, Owner'S Manual

Search results

Summary of Contents for RG-100

Reviews:

Related manuals for RG-100

Brands by name

Popular brands