Edirol RG-100 Owner'S Manual Download Page 43

Page: 43 / 128

About projects

Click [NEW].

The name entry window appears.

fig.name.eps

Click on the characters to enter a project name.

Click [OK].

A new project is created, and the SELECT PROJECT window appears again.

If you wish to continue further, click to select a project, and then click [OK]. The
window disappears and the MAIN MENU screen appears again.

To cancel this operation, click [CANCEL]; the selection window goes away.

Here is how to select a project.

Press and hold the MENU button for more than 2 seconds to access the MAIN

MENU screen.

fig.main menu05.eps

Selecting a project

For detailed instructions
regarding the name entry
window, refer to

“Entering

names”

(p. 108).

If the display shows the
“Lock” message, the MENU
button does not function.

[SELECT]

Project name

000RG-100.book 43 ページ２００４年８月６日　金曜日　午後５時３７分

Summary of Contents for RG-100

































































































































Search results

Summary of Contents for RG-100

Reviews:

Related manuals for RG-100

Brands by name

Popular brands

Edirol RG-100, Owner'S Manual

Search results

Summary of Contents for RG-100

Reviews:

Related manuals for RG-100

Brands by name

Popular brands