81
R-09 Configuration Settings
To reduce power consumption, this feature automatically turns off the display when no
operations are performed within a set period of time.
fig.displaysetting-e.eps_80
1.
Select “Display Setup” from the <Menu Screen>.
Use the [PLAY Button
] and [STOP Button
] to select
“Display Setup,” then press the [REC Button].
fig.displaytimer-e.eps_80
2.
Select “Display Timer.”
Use the [PLAY Button
] and [STOP Button
] to move
the cursor to the Display Timer line.
fig.setdisplaytimer-e.eps_80
3.
Set the time.
Use the [RWD Button
] and [FWD Button
] to change
the Display Time value, and set the time until the screen
goes dark.
Set to “OFF” to keep the screen bright no matter how much
time passes.
(units: seconds)
“Power saving feature” (p. 16)
When finished with the settings, press the [MENU] button to return
to previous screens.
Setting the time until the screen is darkened when
no operations are performed for a set period of time
(Display Timer)
Setting
OFF
2
5
10
20
Move the
cursor
up or down
Enter
Move the
cursor
up or down
Change
the value
R-09_e.book 81 ページ ２００７年２月１３日 火曜日 午後３時２７分
