21
Using the R-09
When turning on power, please follow the procedure below to set the internal clock.
The time and date set here are used as information (time stamp) for the recorded songs.
fig.open-set-e.eps_80
1.
Show the <Menu Screen>.
Press and hold down the [FINDER/MENU Button] to show
the <Menu Screen>.
fig.datetime-e.eps_80
2.
Select “Date & Time.”
Use the [PLAY Button
] and [STOP Button
] to select
“Date & Time,” then press the [REC Button].
When the power is on, the internal clock draws power from the AC
adaptor or the batteries. When the power is off, the internal clock will run
temporarily on the power stored in the main unit. However, if the power is
off for several days, the internal clock settings return to the original
settings (initial status). When power is turned on in initial status, the
message “Clock Initialized” is shown.
If “Clock Initialized” is shown, please reset the date and time.
Setting time and date
Hold down
Show
<Menu Screen>
Move the
cursor
up or down
Enter
R-09_e.book 21 ページ ２００７年２月１３日 火曜日 午後３時２７分
