8
Before Using the PR-80
Names of Things and What They Do
Front Panel
fig.frontpanel.eps
a. CD-ROM Drive and Eject Button
Used for loading data from CD-R/CD-RW disks
containing material created using computers and from
future upgrade CD-ROMs. Press the eject button to
open the disk tray.
b. Hard Disk Bay
The optional removable hard disk (DV-HD Series) is
inserted here. In addition to the internal hard disk, use
of the removable hard disk allows you to store projects
on dedicated disks, back up data, and manage your
data in the most suitable manner.
* You cannot make use of the internal hard disk and the
removable hard disk simultaneously on the same project.
* Always turn off the power to the PR-80 before inserting
or removing the removable hard disk.
* For a detailed explanation of how the removable hard disk
is installed, refer to “About the Removable Hard Disk”
(p. 138).
c. Mic Jack [MIC IN] and Level Knob
[LEVEL]
You can connect a microphone to the MIC IN jack
[MIC IN] and the LEVEL control [LEVEL and use it
with the Editor. With the Editor, you can perform post-
recording or record narration for the sequence you're
editing.
d. DV2 Connector
Digital video input/output. Connect DV devices here.
* The transition effects and output fader are not applied to
the digital video output.
e. USB Connector
Connect an optional remote controller (DV-7DLC),
MIDI interface (UM-1/UM-1S/UM-2/UM-4/UM-
550/UM-880), or a MIDI keyboard (PC-300/PCR-30/
PCR-50).
Connect devices here only when the PR-80’s power is
turned off. You can connect to either of the two
connectors. However, you cannot connect two remote
controllers simultaneously.
f. Headphone Jack [PHONES] and
Volume Knob [LEVEL]
Jack for connecting headphones and knob for
adjusting the headphone volume level.
g. Hard Disk Indicator
Lights when the hard disk is being accessed.
h. POWER Indicator
Lights when the PR-80’s power is on.
i. [POWER] Button
Button for turning on the power to the PR-80.
d
e
a
i
h
g
f
b
c
PR-80_e.book 8 ページ ２００５年１月６日 木曜日 午後９時２２分
