78
Practical Use of the PR-80
Importing Materials
Importing Materials from Another Project
You can import materials from other projects.
1.
Click the [Import] button at the lower right of the Edit Mode screen.
The “Import material” dialog is displayed.
fig.import01.eps
2.
Select the import source disk in the “Disks” list and the import source project in the “Projects”
list.
You can specify a removable hard disk as the destination disk for importing material. For information
on how to work with a removable hard disk, refer to "Instructions for Installing the Hard Disk" (p.
139).
3.
Select the material you want to import, then click the [Import] button.
You can confirm the material in the Project Area to the right.
To select multiple materials, hold down the [Shift] key as you select.
4.
When you have finished importing, click [Close] to close the window.
When you use the above procedure in “Import material here,” which appears after you select a clip
in the “Clips” list or Palette window, and then right-click, you can import and use the material as a
clip at that position.
Select disk
Select material
Select project
Import button
Cancel button
PR-80_e.book 78 ページ ２００５年１月６日 木曜日 午後９時２２分
