75
Practical Use of the PR-50
Importing Materials
Importing Materials from Another Project
You can import materials from other projects.
1.
Click the [Import] button at the lower right of the Edit Mode screen.
The “Import material” dialog is displayed.
fig.import01.eps
2.
Select the import source disk in the “Disks” list and the import source project in the “Projects”
list.
3.
Select the material you want to import, then click the [Import] button.
You can confirm the material in the Project Area to the right.
To select multiple materials, hold down the [Shift] key as you select.
4.
When you have finished importing, press [Cancel] to close the dialog.
When you use the above procedure in “Import material here,” which appears after you select a clip
in the “Clips” list or Palette window, and then right-click, you can import and use the material as a
clip at that position.
Select disk
Select material
Select project
Import button
Cancel button
PR-50_e.book 75 ページ ２００６年１１月２日 木曜日 午後６時２９分
