manualshive.com logo in svg

Edirol PR-50, Owner'S Manual, Page: 124 / 132

Share
Download
Edirol PR-50 Owner'S Manual Download Page 124

 

124

 

About the Removable Hard Disk

 

You can use the PR-50 with an optional removable hard disk (DV-HD Series) in the hard disk bay.

 

Precautions to Note When Using Disks

 

Please observe the following cautions in regard to handling removable hard disks.
Hard disks are considered a consumable item. We recommend that you save any critical video and 
audio you want to keep onto video tape to protect it in the event of a hard disk breakdown.

 

• Components may be damaged by static electricity. When handling the hard disk, hold 

it by the case, and do not touch the connector portion.

• Whenever transporting the removable hard disk, place it in the box in which it came 

when purchased.

• This hard disk can be used only with the PR-50 and DV-7 Series devices. It cannot be 

used with other devices (including Roland VS Series hard disk recorders, personal 
computers, etc.).

• Hard disks are precision devices that require careful handling. The following in 

particular will not only cause the loss of data recorded on the hard disk, but may even 
damage the hard disk itself.

 

•

 

Shock from being dropped.

 

•

 

Vibration while the unit is operating.

 

•

 

Moving the unit while the power is turned on.

 

• Do not leave the hard disk in direct sunlight, near other devices that generate 

significant heat, in a closed vehicle (in hot environments), or other such locations. This 
may result in deformation and discoloration.

• Do not move the hard disk immediately from a hot, humid location to one with low 

temperatures. This may cause damage to the hard disk.

 

•

 

Condensation may form on the hard disk's exterior and interior when it is moved from one location 
(room) to another with different heating or cooling conditions. Using the hard disk in this condition 
may damage it, so leave it as is for several hours before using it.

 

• Do not turn off the power while the hard disk is operating.
• Any disassembly or modification of the hard disk invalidates the warranty. You may 

also be refused repair.

• Video, audio and other recorded data are deleted during repair. We recommend saving 

any important video and audio recordings onto video tape.

• Recorded content may be lost if the hard disk is damaged or if operated incorrectly.
• To avoid the total loss of your video and audio material should it be deleted from the 

hard disk, we recommend that you save any important recordings onto video tape.

PR-50_e.book 124 ページ ２００６年１１月２日　木曜日　午後６時２９分

Summary of Contents for PR-50





































































































































Reviews:

No comments