manualshive.com logo in svg

Edirol PCR-M30, Owner'S Manual

Share
Download
Edirol PCR-M30 Owner'S Manual Download Page 68

 

68

 

Use MIDI functionality

 

Program Change Decrement function (PC DEC)

 

This transmits a program change that is one less than the previously transmitted program 
change number.

 

Program Change Increment function (PC INC)

 

This transmits a program change that is one greater than the previously transmitted program 
change number.
The 

 

PC DEC

 

 or 

 

PC INC

 

 is transmitted on the current channel, just as in 

 

“Program Change 

mode”

 

 (p. 51). The value that is actually transmitted will appear in the display.

• In the explanation here, the “previously transmitted program number” refers to the one 

that was last transmitted by Advanced Mode 3 or 4 or in 

 

“Program Change mode”

 

 (p. 51).

• Program changes transmitted by basic mode or advanced modes 1 and 2 will not affect the 

increment/decrement functions.

■

Advanced modes 3 and 4

Advanced mode 3

 lets you assign the Program Change Decrement function (

PC DEC

) to a 

controller.

Advanced mode 4

 lets you assign the Program Change Increment function (

PC INC

) to a 

controller.

1.

Press the 

[EDIT]

 button.

2.

Slightly move the controller to which you want to assign Program Change 

DEC

/

INC

. In 

the case of a button, press that button.
The display will indicate the number of the selected controller.

3.

Confirm what’s indicated, and press the 

[ENTER]

 button.

4.

Press the 

[PROGRAM CHANGE]

 key and then press key 

[3]

 or 

[4]

.

5.

Press the 

[ENTER]

 button.

PCR-M30/50/80.book 68 ページ ２００５年１１月１０日　木曜日　午後２時４９分

Summary of Contents for PCR-M30





























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands