Edirol PCR-M30, Owner'S Manual

Page: 57 / 124

57
Use MIDI functionality
NOTE ASSIGN
Here’s how to assign a Note message to a controller. In addition to being used to play sounds,
note messages can also be used to control a sequencer.
■
Basic mode
fig.edt
1
Press the [EDIT] button.
The display will indicate “EDT.”
fig.r-1
2
Slightly move the controller to which you want to assign a Note message.
In the case of a button, press that button.
The display will indicate the number of the selected controller.
3
Verify that the display shows the correct controller number, and press the
[ENTER] button.
fig.nt0
4
Press the [NOTE] key.
The display will indicate “NT0.”
fig.c
5
Press the [ENTER] button.
The display will indicate “C–.”
6
Input the channel. Use the [DEC][INC] buttons or the [0] - [F] keys to specify
the channel.
fig.n
7
Press the [ENTER] button.
The display will indicate “N–.”
8
Input the note number. Use the [DEC][INC] buttons or the [0] - [F] keys to specify the note
number.
9
Press the [ENTER] button.
10
If you are making an assignment for a button, specify the button mode.
(
➔
“Specifying the button mode” (p. 59))
Mode Keyboard Velocity Port
Basic mode 0 100 (64H) PORT 1
Advanced mode 1 Assignable Assignable
*1 Reference
*1 Reference
PCR-M30/50/80.book 57 ページ ２００５年１１月１０日 木曜日 午後２時４９分