Edirol PCR-M30, Owner'S Manual

Page: 28 / 124

28
Getting Connected and Installing Drivers (Windows)
Make the following settings so that you can use the MIDI functionality of the
PCR-M30/50/80. For a connection diagram, refer to
“Basic connections
and MIDI flow” (p. 40).
1
Open Control Panel .
Click the Windows Start menu, and from the menu that appears, select
Settings | Control Panel .
2
Open the Multimedia Properties dialog box.
In Control Panel , double-click the Multimedia icon to open the “Multimedia
Properties” dialog box.
3
Click the MIDI tab.
fig.98-E
4
Set “MIDI output.”
Select [Single instrument] , and select
the MIDI device from the list that
appears, and click
[Apply] .
If you want to use Media Player to play
a sound module connected to the
PCR’s MIDI OUT connector, select
EDIROL PCR MIDI OUT .
5
Close the Multimedia Properties dialog box.
Click [OK] to complete the settings.
Windows 98 users
For details on the PCR’s
input/output devices,
refer to
“Input / output
devices” (p. 43).
Select the appropriate
MIDI device for your
system. You do not
necessarily have to select
EDIROL PCR MIDI OUT .
This completes settings for using the PCR with an software that uses the standard Windows device
settings, such as Media Player.
For details on how to make these settings, refer to the owner’s manual for your software.
For details on the PCR’s input/output devices, refer to
“Input / output devices” (p. 43).
PCR-M30/50/80.book 28 ページ ２００５年１１月１０日 木曜日 午後２時４９分