Edirol PCR-M30 Owner'S Manual Download

Page: 24 / 124

Getting Connected and Installing Drivers (Windows)

Giving priority to background services

In Windows 2000, make settings to give priority to background services. If
you fail to make this setting, you may experience interruptions in the sound.
To ensure that MIDI processing occurs smoothly, use the following
procedure to make settings.

Click the Windows

Start

menu, and from the menu that appears, select

Settings

Control Panel

. In

Control Panel

, double-click the

System

icon.

Click the

Advanced

tab.

At the right of the

Performance

field, click

[Performance Options]

The

Performance Options

dialog box will appear.

fig.back2000

In the

Application response

field, choose

“Background

services”

and click

[OK]

Click

[OK]

to close the

System Properties

dialog box.

Next, make device settings.
(

➔

Settings and checking

(p. 26))

PCR-M30/50/80.book 24 ページ２００５年１１月１０日　木曜日　午後２時４９分

Summary of Contents for PCR-M30





























































































































Search results

Summary of Contents for PCR-M30

Reviews:

Related manuals for PCR-M30

Brands by name

Popular brands

Edirol PCR-M30, Owner'S Manual

Search results

Summary of Contents for PCR-M30

Reviews:

Related manuals for PCR-M30

Brands by name

Popular brands