Edirol PCR-A30, Owner'S Manual

Page: 82 / 112

82
System settings
●
SYSTEM
Here’s how you can make various system settings for the PCR-A30.
fig.edt2
1
Press the [EDIT] button.
The display will indicate “EDT”.
2
Press the [SYSTEM] key.
The display will indicate “SY0”.
fig.sy0
3
Use the [0] – [8] , [A] – [E] keys to specify the System setting that you want to set,
and then press the [ENTER] button.
Confirm what’s indicated and use the appropriate method to make the setting.
Mode
Key-
board
Content of the setting Default
Setting
method
F8 CLOCK ON/OFF 0 Specify whether F8 Clock is to be transmitted. OFF p. 83
F8 CLOCK DEFAULT
TEMPO
1
If “F8 CLOCK ON/OFF” is ON, specify the default value
of the F8 Clock. After the power is turned on, this tempo
will continue to be output until you move a controller to
which TEMPO is assigned.
120 p. 83
F8 CLOCK PORT SET 2
If “F8 CLOCK ON/OFF” is ON, specify the port from
which the F8 Clock is to be transmitted.
PORT 1 p. 83
VELOCITY OFFSET 3
The value you specify here will be added to the velocity
of the notes played from the keyboard.
* If the result of the addition would exceed 7FH, the ve-
locity will be 7FH.
0 p. 83
KEYBOARD PORT SET 4
Specify the port from which messages produced by the
BENDER lever of the keyboard are to be transmitted.
PORT 1 p. 83
H-ACTIVITY ON/OFF 5
Turn this ON if you are using certain applications (such
as Pro Tools LE).
When ON,
“90 00 7F” will be output from PCR 2 approx-
imately every 500 ms.
OFF p. 83
USB MIDI DRIVER
MODE
6
Specify the type of USB MIDI driver used for USB connec-
tion. Original
Driver
p. 83
STARTUP MEMORY 7
Specify the memory that will be selected when the power
is turned on.
GM2 p. 84
FACTORY RESET 8
Restore all settings of the PCR-A30 to their factory-set
condition.
- p. 84
USB AUDIO ON/OFF A
Switch the USB AUDIO functionality on/off.
* The setting will take effect the next time you turn on the
power
ON p. 84
USB AUDIO MODE
SETTING
B
Specify the USB AUDIO sampling frequency and driver
mode.
* The setting will take effect the next time you turn on the
power.
44.1kHz
(ADVANCE)
p. 84
DIRECT MONITOR
ON/OFF
C
Make Direct Monitor settings (Sending the input signal
from the audio input jacks directly to the PCR-A30’s
speakers or headphone jack).
ON p. 85
INPUT GAIN D
Select either LINE, GUITAR, or MIC according to the de-
vice connected to the audio input jacks.
LINE p. 85
SPEAKER ON/OFF E Switch the PCR-A30’s speaker function on/off. ON p. 85
PCR-A30_e2.book 82 ページ ２００３年１０月２２日 水曜日 午後３時１９分