77
Using the PCR-A30 as a MIDI controller
Transmitting/receiving bulk data
(BULK)
Bulk dump allows a large amount of data to be transferred in a single operation. For example, this
can be used to store all settings of a device into a computer or sequencer.
*
When you transmit or receive Bulk data, the contents of the current memory will be lost. Save the current
memory settings as needed before you perform this operation.
●
Receive mode
fig.edt2
1
Press the
[EDIT]
button.
The display will indicate “EDT”.
fig.blr
2
Press the
[BULK]
key.
The display will blink “BLR” (Bulk Receive).
fig.rs
3
The dConfirm what’s indicated and press the
[ENTER]
button.
isplay will indicate “RS”, and the “S” will blink.
4
Use the
[DEC]
[INC]
buttons or the
[0]
[1]
keys to select the mode.
fig.rs1
5
Confirm what’s indicated and press the
[ENTER]
button.
The third digit of the display will blink, and the PCR-A30 will wait to receive
bulk data.
0
SINGLE BULK
The received data will overwrite the current mem-
ory. Memories 1–F will not be affected.
1
ALL BULK
The received data will overwrite memories 1–F.
PCR-A30_e2.book 77 ページ ２００３年１０月２２日 水曜日 午後３時１９分
