Edirol PCR-A30, Owner'S Manual

Page: 42 / 112

42
Use audio functionality
Digitally recording sound from your computer
fig.digital.e
●
Connections
Use an optical digital cable to connect your recording device to the Digital output jack.
●
Setting the Sampling frequency
Set your audio playback software, the PCR-A30, and your digital recording device (e.g., MD or
DAT) to the same sampling frequency (p. 84).
* Whenever you’ve changed the sampling frequency, you must exit any applications you are using, switch
off the PCR-A30, then switch it on again.
Don’t connect anything to input jacks you are not using.
* The PCR-A30 does not support professional digital audio formats.
* The PCR-A30 is not able to output the input signal from its input jacks directly to its digital output jack.
The digital output jacck always output only the audio signal that is being sent from your computer.
MD / DAT player, etc
Audio flow fi
It is not necessary to connect the AC adaptor if
you are using a USB connection. However, with
some computers, the PCR-A30 may not operate
when powered from the USB bus. In this case,
set the power switch to the DC position and
connect the AC adaptor.
AC adaptor
USB cable
DIGITAL
OUT
DIGITAL IN
PCR-A30_e2.book 42 ページ ２００３年１０月２２日 水曜日 午後３時１９分