Edimax IC-6230DC, User Manual, Page: 50 / 71

50
IV-4-2. NAS Settings
If using a NAS server for local storage, configure the settings on this page
according to your NAS.
Status Displays the status (connected or
disconnected) of your network camera and
NAS server.
NAS IP & Sharing
Resource Enter the local IP address of your NAS and the
path of a shared folder to store your network
camera’s recordings.
Notification for
space full Enable or disable email notifications when
your storage space is full.
Cycle Recording Enable or disable cycle recording. When
enabled, cycle recording will overwrite the
earliest recordings when the storage space
becomes full. When disabled, recording will
stop when storage is full.
Authentication Select “Account” and enter the username and
password in the fields below if your NAS
server requires authentication. Select
“Anonymous” if no authentication is required.
Username Enter the username if “Account” is selected
above.
Password Enter the password if “Account” is selected
above.