8
I-4.
Product Label
The product label located on the underside of the network camera displays
the serial number, MAC address and cloud ID of your network camera.
The MAC address and cloud ID are the same for easy reference.
The cloud ID allows you to view a live stream from your network camera
remotely (from any Internet connection) as described later in
V.
Myedimax.com
.
I-5.
Reset
If you experience problems with your network camera, you can reset the
camera back to its factory default settings. This resets
all
settings back to
default.
Press and hold the Pair/Reset button on the back panel for at least 10 seconds.
Release the button when the power LED is
flashing quickly
green
,
and wait a
couple of minutes for the unit to restart.
Take care to hold the button for at least 10 seconds. The Pair/Reset
button will clear the wireless pairing between your gateway unit and
camera unit if held for only 5 seconds. Refer to
III. Pair Button
.
