Edimax IC-5170SC, User Manual

Page: 43 / 137

43
IV-1-2-2. Computer
1.
Configure the wireless settings A – E shown in the table below:
2.
After the settings are saved, remove the Ethernet cable from your
network camera. Your camera should now be connected to your Wi-Fi.
A
Wireless Connection Select “Enable” to enable the wireless connection.
B
Available Network
Click “Refresh” to display all available Wi-Fi
networks.
C
Connected
Select your Wi-Fi network from the list. This is the
wireless network which your camera will connect to.
D
WPA Pre Shared Key Enter your Wi-Fi password.
E
Save Settings Click “Save Settings” to save your settings.
A
C
D
E
B