19
IV-1-4-2
SNMP Group Table
To configure and display the SNMP group table, click
Administrator > SNMP Settings >
SNMP Group Table.
Figure 17 - Administrator > SNMP Settings > SNMP Group Table
Item
Description
Group Name
Specify SNMP group name, and the maximum length is 20
characters.
Read View
Specify read access for the newly added group
Write View
Specify write access for the newly added group
Notify View
Specify Trap View for the newly added group
Security Model
Specify the SNMP version for the newly added group
Security Level
Specify SNMP security level for the newly added group,
only support SNMPv3
NoAuthNoPriv –No authorization and no encryption
for packets sent
AuthNoPriv –Authorization is required, but no
encryption for packets sent
AuthPriv – Both authorization and encryption are
required for packets sent
Delete
Remove the existing group
