manualshive.com logo in svg

EdilKamin WINDO2 75, Installation, Use And Maintenance Manual, Page: 13 / 20

Share
Download
EdilKamin WINDO2 75 Installation, Use And Maintenance Manual Download Page 13

13

ENGLISH

INSTALLATION

Natural convection circulation 

Natural convection circulation 

The hot air produced by the 

fi

 replace is released into 

The hot air produced by the 

fi

 replace is released into 

the rooms to be heated by the nozzles connected to 

the rooms to be heated by the nozzles connected to 
the  holes  on  the  cover  of  the  hood  with  aluminium 

the holes on the cover of the hood with aluminium 
pipes Ø 14 cm.It is essential to guarantee the return of 

pipes Ø 14 cm.It is essential to guarantee the return of 
the air into the room where the 

fi

 replace is installed by 

the air into the room where the 

fi

 replace is installed by 

means of grills at the base of the walls or gaps under 

means of grills at the base of the walls or gaps under 
the doors.The diameter of the pipes must not be less 

the doors.The diameter of the pipes must not be less 
than Ø 14 cm.

than Ø 14 cm.
The line of the pipes must be as straight as possible. 

The line of the pipes must be as straight as possible. 
The aluminium pipes can be hidden with coffer work or 

The aluminium pipes can be hidden with coffer work or 
false beams or they can be built into the walls; in any 

false beams or they can be built into the walls; in any 
case, they must be well insulated.

case, they must be well insulated.
The channels must have a maximum length of 4÷5 m 

The channels must have a maximum length of 4÷5 m 
each.

each.
The  said  length  must  be  decreased  by  1.2  m  for 

The said length must be decreased by 1.2 m for 
every curve and for every nozzle consequent to the 
consequent load loss.
The following kits are available to channel hot air.
Kit one/bis solo locale caminetto
Kit four/bis
Kit 

fi

 ve/bis

Further details are provided in the assembly instructions 
supplied with the kit itself.

Circulation with Kit Air Diffuser

Circulation with Kit Air Diffuser

The Air Diffuser Kit carries hot air into the room where 
the product is installed or into other rooms (depending 
on the model), assisted by one or more fans.
It is adjusted with a remote control.

Edilkamin proposes two Air Diffuser Kit models:
ADJACENT Air Diffuser Kit
REMOTE Air Diffuser Kit
The difference is in the presence or 1 or 2 fans and the 
relative aluminium pipes.
The kit can be combined with each of the following 
Edilkamin vents:
Split, with lighting
Bent, with lighting
Origami
Sharp

The vents are not included in the Air Kit Diffuser and 
you can choose the one of the four models available 
and described which best suits your needs at the 
retailer.

Kit Air Diffuser Remote- ex

Kit 4 bis-ex

R2 unions

Vent

Alluminium 
pipe

Vent

Fan

Control 

unit

Aluminium pipe, 

dia. 60 mm

Vent

Compensation vent

Compensation vent

Aluminium pipe, 

dia. 100 mm

Summary of Contents for WINDO2 75





















Reviews:

No comments