12
ENGLISH
INSTALLATION
NATURAL CONVECTION CIRCULATION
NATURAL CONVECTION CIRCULATION
PRIOR TO INSTALLING THE FACING MATERIAL, IT IS
PRIOR TO INSTALLING THE FACING MATERIAL, IT IS
NECESSARY TO DECIDE WHETHER TO PURCHASE
NECESSARY TO DECIDE WHETHER TO PURCHASE
AND INSTALL THE “AIR DIFFUSER KIT” FOR FORCED
AND INSTALL THE “AIR DIFFUSER KIT” FOR FORCED
VENTILATION
VENTILATION
The ambient air enters the structure through openings
The ambient air enters the structure through openings
along the lower section of the
fi
replace casing
along the lower section of the
fi
replace casing
(1)
(1)
The openings on the
fi
replace casing are initially
The openings on the
fi
replace casing are initially
closed and must be opened by removing the pre-cut
closed and must be opened by removing the pre-cut
membranes to enable the ambient air to pass through
membranes to enable the ambient air to pass through
them.
them.
The ambient air heats up and rises by convection
The ambient air heats up and rises by convection
along the air gap behind the hearth and emerges hot
along the air gap behind the hearth and emerges hot
from the vents
from the vents
(2)
(2)
positioned on the casing’s cover.
positioned on the casing’s cover.
The length of the ducting depends on the product’s
The length of the ducting depends on the product’s
insulation and manner of use.
insulation and manner of use.
Micro-switch (M-
Micro-switch (M-only if the Air Diffuser Kit
is installed).
The micro-switch located on the front, on the same
level as the hearth and visible after removing the front
panel switches the fans off when the door is opened.
To activate it, connect it electrically to the kit’s fans.
2
1
M
It is essential to guarantee the return of
the air into the room where the
fi
replace is
installed by means of grills at the base of
the walls or gaps under the doors.