EdilKamin LOU, Installation, Use And Maintenance Manual, Page: 31 / 125

- 31
-
ENGLISH
CHECK LIST
To be integrated with a complete reading of the technical specifi cations
Positioning and installing
•
First ignition performed by authorised CAT who released the guarantee certifi cate
• Air vent in the room
• Only the stove outlet passes through the smoke channel/chimney fl ue
• Features of the smoke channel (stretch of duct connecting the stove to the fl ue/chimney):
• a maximum of 3 curves,
a maximum 2 horizontal metres
• Chimney pot that is high enough to avoid downdraft areas
• The discharge pipes are made of a suitable material (stainless steel is recommended)
• When using any fl ammable materials (e.g. wood), all precautions have been taken to prevent a fi re hazard
Use
• Good quality, dry pellets are used
• The chimney pot and ash compartment are clean and well positioned
• The door is closed properly
• The combustion chamber is inserted properly into the relevant compartment
REMEMBER TO VACUUM THE COMBUSTION CHAMBER BEFORE EACH IGNITION
Should ignition fail, DO NOT re-ignite until you have emptied the combustion chamber.
CLEANING ACCESSORIES
OPTIONAL
TELEPHONE DIALLER FOR REMOTE IGNITION (code 281900)
The stove can be ignited remotely by asking the DEALER to connect the telephone combiner to the serial port behind the stove via the
optional cable (code 640560).
Ash vacuum cleaner without motor
(code 275400)
User for cleaning the hearth
(to be use together with a domestic va-
cuum cleaner)
GlassKamin
(code 155240)
Used for cleaning the
ceramic glass
INFORMATION FOR USERS
In accordance with Art. 13 of the Legislative Decree No. 151, dated 25 July 2005, “Implementation of Directives: 2002/95/EC,
2002/96/EC and 2003/108/EC, pertaining to the reduction of hazardous substances used in electrical and electronic equipment,
as well as disposal of waste”. The crossed-out wheeled bin symbol shown on the equipment or on the packaging indicates that
the product must be disposed of separately at the end of its useful life. Therefore, at the end of the equipment’s useful life, the
user must hand in the equipment to suitable collection facilities for electrical and electronic waste, or return it to the retailer
when a new, equivalent appliance is purchased in a ratio of one to one.