EDILGRAPPA 230DE T10, Use And Maintenance Instructions, Page: 15 / 24

15
5 ROUTINE MAINTENANCE
1.
All maintenance, inspection and cleaning interventions on the machine
must be performed with the machine disconnected from the hydraulic
power unit and cold (see the person in charge in the maintenance
intervals table);
2.
Maintenance operations must be performed in a suitable place
according to current safety regulations;
3.
Before any maintenance intervention, thoroughly clean the machine
(see Paragraph 5.01);
4.
Wear suitable personal protective equipment while performing
maintenance work.
AT THE END OF EACH MAINTENANCE INTERVENTION ON THE
MACHINE, CHECK THAT ALL GUARDS HAVE BEEN CORRECTLY
REPLACED AND REINSTALLED
.
Periodic maintenance schedule
Frequency Operation Method Person
EVERY 8
HOURS

CHECKING THE INTEGRITY OF
THE MACHINE
Visual Operator
EVERY 8
HOURS

MACHINE CLEANING
Para 5.01 Operator
EVERY 8
HOURS

TIP WEAR CHECK Visual Operator
/

TIP REPLACEMENT /
Authorised
personnel
EVERY 8
HOURS

CHECK THE TIGHTNESS OF
NUTS AND BOLTS
Para 5.02 Operator
EVERY 8
HOURS

PIN GREASING Para 5.03 Operator