Edic Saturn 17DS3-BK-SV, Owner'S/Operator'S Manual, Page: 6 / 13

6
5. Open the handle carton and set the handle nearby the
motor base.
6. Unscrew the nut (C13100 )from the pivot axle screw
(C22558). Slide out the pivot axle screw from the
handle bracket on the motor base frame.
7. Insert the pivot tube at the lower end of the handle be-
tween the handle bracket on the base frame and align the
holes to one another.
8. Insert the pivot axle screw (C22558) through the
handle bracket and the handle pivot tube. Hand tighten
the nut (C13100) to the pivot axle screw and finish by
tightening with a wrench.
ASSEMBLY OF THE HANDLE TO THE MOTOR
BASE:
1. Locate the nut (C11558) on the end of the locking
clamp handle assembly (C11536) and unfasten it.
2. Slide out the locking clamp handle (D11497) assembly
with spade bolt (C11536) and set it aside.