Edic 419TR, Owner'S/Operator'S Manual, Page: 5 / 13

TO CLEAN UPHOLSTERY:
Cleaning upholstery with success requires a good knowl-
edge of the type of fabric to be worked on. Look for the
cleaning label sewn on the underside of the furniture
for the recommended method of cleaning the fabric. If
it calls for dry cleaning, do not attempt to clean with the
wet extraction method. Otherwise, damage to the fabric
could occur. Extraction works on most synthetic fibers.
Before proceeding, test fabric for colorfastness. Pour a
small amount of cleaning solution on the fabric in an in-
comspicious spot. Rub the area with a white terry towel.
If no color comes off the towel, the fabric should be safe
to clean. If color transfers, do not continue.
NOTE: UPHOLSTERY KITS ARE SOLD SEPARATELY
AND DO NOT COME WITH THE MACHINE
PREPARE THE MACHINE
1. Complete Step 1 under “TO CLEAN CARPET”
Instructions.
2. Disconnect the vacuum hose with black hose cuff
from the lid and disconnect the solution hose from
the back of the machine. Replace them with the up-
holstery vacuum and solution hoses.
3. TO CLEAN
Turn switch to “UPHOLSTERY” position. Depress
upholstery tool trigger while pulling tool across
upholstery surface with overlapping strokes. To
speed drying, go over the upholstery again without
depressing the trigger. Continue cleaning until clean-
ing solution is consumed. Empty and rinse bucket.
Repeat Step I and 2.
4. CHECK BUCKET LID
See Step 3 under “To Clean Carpet.”
5. CLEAN MACHINE BEFORE RETURNING
See Step 4 under “To Clean Carpet.”
5