Edgetech USBL BROADBAND ACOUSTIC TRACKING SYSTEM User Hardware Manual Download Page 8 | Manualshive

Page: 8 / 102

Edgetech USBL BROADBAND ACOUSTIC TRACKING SYSTEM User Hardware Manual Download Page 8

viii

BATS

0018257_REV_A

SOFTWARE SERVICE OVERVIEW

EdgeTech provides software services free of charge. This software agreement does not address customer-
specified modifications or enhancements. These services may be ordered separately. Furthermore,
EdgeTech software upgrades are meant for the sole use of EdgeTech customers. Any reproduction of
EdgeTech-supplied software or file sharing is strictly prohibited.

Software Updates and Enhancements

EdgeTech customers can download new software releases with all modifications and enhancements from
the EdgeTech ftp site. Major software issues, should they occur, will be reported directly to the customer.
New software releases consist of the following:

•

Software enhancements that are not on the price list

•

Software fixes and changes

•

Product integration

•

Documentation updates to online help

•

Tests for compatibility with other modules

Software patches consist of software that has undergone the following:

•

Minor software enhancements

•

Software fixes and changes

EdgeTech customers are entitled to contact

by telephone, facsimile, or e-mail

to report a difficulty, to discuss a problem or to receive advice on the best way to perform a task. When
contacted, EdgeTech Customer Service will do the following:

•

Respond within 24 hours via Telephone, Facsimile, and E-mail Support

•

Immediately attend to serious problems affecting operations

•

Attempt to find an immediate work-around

«
...
6
7
8
9
10
...
»

Summary of Contents for USBL BROADBAND ACOUSTIC TRACKING SYSTEM







































































































Reviews:

No comments