Edgetech STARMUX III, User Hardware Manual

Page: 5 / 34

v
ABOUT THIS DOCUMENT
We, the employees at EdgeTech, would like to thank you for purchasing STARMUX III. At EdgeTech, it is
our policy to provide high-quality, cost-effective products and support services that meet or exceed your
requirements. We also strive to deliver them on-time, and to continuously look for ways to improve them.
We take pride in the products we manufacture, and want you to be entirely satisfied with your equipment.
Purpose of this Manual
The purpose of this manual is to provide the user with information on the setup and use of EdgeTech’s
STARMUX III. Although this manual encompasses the latest operational features of the STARMUX III, some
features may be periodically upgraded. Therefore, the information in this manual is subject to change and
should be used for reference only.
Liability
EdgeTech has made every effort to document the STARMUX III in this manual accurately and completely.
However, EdgeTech assumes no liability for errors or for any damages that result from the use of this
manual or the equipment it documents. EdgeTech reserves the right to upgrade features of this
equipment, and to make changes to this manual, without notice at any time.
Warnings, Cautions, and Notes
Where applicable, warnings, cautions, and notes are provided in this manual as follows:
WARNING! Identifies a potential hazard that could cause injury or death.
CAUTION! Identifies a potential hazard that could damage equipment or
data.
NOTE: Recommendations or general information that is particular to the
material being presented.
Revision History
Revision Notes Date Approval
A Release to Production 04/13/2015 TS
B Updated images and technical description 07/11/2016 TS