EdgeStar IB450SS Owner'S Manual Download Page 2

ii 

 

 
 

Important Safety Information 

 
Improper handling can cause serious damage to the EdgeStar ice maker and/or injury to the user. 
This ice maker is designed for domestic indoor use only. Do not use the unit for industrial or 
commercial use.  Any other use may invalidate the warranty. Please review the ratings label located 
on the rear panel of the unit for electrical and other technical data related to this unit. The unit must 
be used in a properly grounded wall outlet. Please read and follow the safety information listed below 
to reduce the risk of fire, electric shock or injury. 

Installation should only be done by a licensed 

plumber.

 

 

 

 

 

 

 

 
 

Electrical Safety 
 

  Do not exceed the power outlet ratings.  

  It is recommended that the ice maker be connected on its own circuit.  

  The unit must be installed in accordance with state and local electrical, water, and drain codes.  

  A standard electrical supply (115 V, 60Hz), that is properly grounded in accordance with the National 

Electrical Code and local codes and ordinances is required.   

  Use outlets that cannot be turned off by a switch or pull chain. 

  Always turn the unit off and unplug it from the outlet when cleaning. 

  Unplug the unit if it is not going to be used for an extended period of time.  

  Do not operate the unit with a power plug missing the ground plug, a damaged cord, or a loose 

socket. 

  Be sure the ice maker is properly grounded. 

  Never plug or unplug the unit with wet hands. 

  Do not bypass, cut, or remove the grounding plug.  

  Do not use extension cords or power strips with this unit. You may need to contact your electrician if it 

is necessary to use a longer cord or if you do not have a grounded outlet. Do not modify the power 
cord’s length or share the outlet with other appliances.  

 

Do not start or stop the unit by switching the circuit’s power on and off. 

  If the power cord is damaged, it must be replaced by the manufacturer or a qualified technician.  

  Never open the unit while it is plugged in. 

  Immediately unplug the unit if it makes strange sounds, emits smells, or smoke comes out of it, and 

contact customer service. 

  Do not remove any part of the casing unless instructed to do so by an authorized technician. 

  You should never attempt to repair the unit yourself. Contact a customer service specialist for service 

options if the unit needs service. 
 

 

Summary of Contents for IB450SS
























Reviews: