17
Operation
Installation Checklist before Operation
Using the Temperature Control Panel
1. Have all packing materials and tape been removed from the interior and exterior of the kegerator?
2. Have the installation instructions been followed, including connecting the machine to electricity?
And has proper grounding been installed for the kegerator?
3. Has the machine been leveled?
4. Is the kegerator in a site where the ambient temperature is between 50° F and 90° F all year
round?
5. Is there a clearance of at least 1- 2” at the rear, 1/2” at the top, and 1/4” at the sides for proper air
circulation?
The kegerator has a temperature range from 32°F to 60°F and will display the set temperature.
Power Button:
Press and hold for approximately 3 seconds to turn the unit on or off.
Up Button:
Press to increase the temperature by 1 degree increments.
Down Button:
Press to decrease the tempreature by 1 degree increments.
ºC/ºF
Run Light:
When lit, the unit is in cooling mode.
i
Celsius/Fahrenheit Button:
Press and hold for approximately 3 seconds to switch
between C and F. A beep will occur and the indicator light will illuminate next to desired
temperature setting.
Note:
The internal LED light will illuminate when the door is open.
Summary of Contents for BR1500BL
Page 24: ...www edgestar com 2021 EdgeStar...
