Edge PresencePlus P4, User Manual

Page: 54 / 182

46
P/N 120413
01/05
Setup PresencePLUS ® P4 EDGE
Banner Engineering Corp. • Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
Trigger Timing Options
The validity and timing of the trigger may be modified through three settings: Trigger Divide, Trigger Delay, and Minimum
Trigger Width. Enter the appropriate values, or set the values by using the arrows.
Trigger Divide (range: 1 – 10,000 triggers)
Sets the sequence of valid triggers. If set to 1, an image is captured in
response to every valid trigger; if set to 2, an image is captured in
response to every second valid trigger, and so on.
Trigger Delay (range: 0 – 8,000 ms)
Fixed time (ms) from the instant the Sensor receives a valid trigger to the
instant the Sensor captures the image.
See the
Timing Diagram
on page 45.
Minimum Trigger Width (range: 1 – 8,000 ms)
Eliminates unwanted triggers by accepting triggers only if they are above a
specified length of time.