Edge PresencePlus P4, User Manual

Page: 22 / 182

14
P/N 120413
01/05
Installation PresencePLUS
®
P4 EDGE
Banner Engineering Corp. • Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
Trigger (Pink Wire), Pin 4
•
Input from an external triggering device is needed to signal the Sensor to acquire images.
•
The Sensor can be set to respond to either the leading or trailing edge of the trigger pulse.
•
Trigger pulse width can be set from 1 millisecond to 8 seconds. The default is 1 millisecond.
•
Trigger modes:
- Input current sinking mode (external PNP driver)
- Input current sourcing mode (external NPN driver)
-------------------------------------
PNP and NPN Leading-Edge and Trailing-Edge Trigger Inputs
Leading-Edge PNP Configuration Trailing-Edge PNP Configuration
Leading-Edge NPN Configuration Trailing-Edge NPN Configuration
Trigger Delay
Trigger Delay
Trigger Delay
Trigger Delay
Minimum Pulse Width
1-8,000 ms
Minimum Pulse Width
1-8,000 ms
Minimum Pulse Width
1-8,000 ms
Minimum Pulse Width
1-8,000 ms
ON
Inspection
OFF
Idle
OFF
Inspection
ON
Idle
ON
Inspection
OFF
Idle
OFF
Inspection
ON
Idle
Input Trigger Signal
Input Trigger Signal
Input Trigger Signal
Input Trigger Signal