Edge PresencePlus P4, User Manual

Page: 137 / 182

01/05
P/N 120413
129
User’s Manual Run
Banner Engineering Corp. • Minneapolis, MN USA
www.bannerengineering.com • Tel: 763.544.3164
Results Window
In the Run screen, the Results/Navigation window at the bottom of the display defaults to the Results window shown below. The
Results window provides the following information:
Capture: All available information about the last displayed inspection
Results Window
o
Each tool in the list can be expanded to show its results. Each result shown indicates the tolerance assigned to the parameter
and its current value.
• If the current value falls within the Test tool’s set tolerance or if the tool executed properly, then a green symbol is
shown beside that parameter (see Passed tool in the illustration above).
• If the current value falls outside the Test tool’s set tolerance or if the tool failed to execute properly, then a red symbol is
shown beside that parameter (see Failed tool in the illustration above).
Click to collapse the view
to hide the information that
follows.
Execution time (ms)
If time shown is 0, the
execution time is less
than 100 microseconds.
Click to expand the view
to see more information.
Passed tool
Failed tool